Hot New FTZ ATV Stuff:

These are some of the new items we have been having great success with.
Call with any questions! 573-334-5439 - 9:00 to 6:00 Mon-Fri Central Time
fax us at 573-334-0900 or email us at mail@ftzracing.com

For Sale: We have a nice TRX 250r bottom end here that we can build into an ATV or shifter kart motor- from 250cc to 380cc.
We also have a TRX Stroker motor set up for Motocross or general off road riding. Let us put a killer package together for you!

New parts offered outright:
Summer '07: With the addition of our CNC machining equipment we have been able to streamline the manufacturing of much of the products that we, for years, had to hand fabricate. This has allowed us to now offer these items to other engine builders and do-it-yourselfers. Here are some examples:

FTZ "Booster" Power-Jet
for 2 or 4 Stroke carburetors.

For installing in your carb of choice.		    
This FTZ designed power-jet has have been the "Standard" for Alcohol 2-Strokes for decades. And over the years we have also seen them used successfully for gasoline, as well as used on 4-strokes from single cylinder dirt bikes to turbocharged four cylinder motors! FTZ "Booster" Power-Jet....$95

FTZ Billet Domes
to fit Pro-X, ESR, or Pro-Design 2-Stroke heads.		    
These are FTZ designed Domes for your Banshee or 250 based 2-Stroke motor- Take advantage of our decades of gasoline and alcohol power development. Custom machined to your needs. Call for specifics

* Four Stroke Porting & Head Mods
For most models.
Single and Multi Cylinders
The headwork is what makes a good motor into a great motor. Much craftsmanship go into these mods.
Total reshaping of the ports and combustion chambers and installing oversize valves greatly increasing both flow and velocity in the intake tract, giving the motor a "supercharged" effect by ram tuning. This headwork will usually gain more power than a big bore kit! And a must with one!
No other builder's "port job" even comes close.....................Call for pricing for your bike
Cam timing, sprocket slotting, and shimming extra. Pistons, cams, spring kits, & rebuilding all available
* * MYCHRON DATA SYSTEMS- New! Whether or not you realize it, you need one of these on your bike- It will make you faster and eliminate much "guessing".
We now carry the Mychron line of data acquisition systems! These little jewels can display your last lap time, record the RPMs, exhaust gas temperature, water & oil temps, fuel & oil pressure and even air/fuel ratio! You can upload the last race to your laptop or PC for graphing out the last race- A tuners dream! Never have to guess about gearing or jetting again.. from $650 to $1500 Call us for more info and pricing.

** FTZ Billet 2-Stroke Silencers.

These are very lightweight and Sturdy units made in-house from 6061 alloy.
No fancy polygon shape to insult your intelligence, just a light tough silencer for the serious racer.
Fits most 250 based exhausts, both in-frame and Drag pipes. Easy to re-pack. ..................$95

* New FTZ Pleated Air Filters- More pleats for more area for more airflow and better filtration...$24.95 ea.
*Blue filter oil..........$7.95 *Custom made 4-in-1 Outerwears for these filters.......$12.95

FCR Keihen Flat-Slide Racing Carburetors
for 450's & most others.

Specify for Gasoline or Alcohol

*Daytona Digital MICRO TACHOMETER-

This is a 20,000 rpm Digital tachometer that will accurately read the engines rpm's. It also has the maximum rpm recall feature, so you can see what the max rpm was after the race.
This can save your motor...............$149.95

*Daytona Digital WATER TEMP GAUGE-

We now have an easy-to-read, matching water temp gauge to match the Daytona tachometer. Can be wired 12 volt or ran from its internal battery. Very lightweight and compact, a real advantage in tuning your carburation. For both 2-strokes and 4-strokes. This can also save your motor...............$99.95 Can also be used to monitor oil temps to further prevent engine failures.

We now have in-house CNC machining capability!


These are the rotors for our Full-Race Battery-fired Ignitions>

We now have in-house CNC machining capability.
If we need something better- Now we just make it......
You may have noticed some of our new covers and parts, etc. with the FTZ logo.
There will be much more to come. Got any good ideas for parts needed? Let us know!

Back TO FTZ HOME  Back to FTZ MICRO SPRINT Page